KIS CLASS RULES 2020

2020 Rules

  

‘70 TO ‘99 CARS--NO IMPS, HEARSES OR AMBULANCES. NO ‘74,’75,or ‘76 OF ANY MAKE. NO CORDOBAS. 

 ONLY RULES ON THIS PAGE CAN BE USED
--2 DOOR CARS GET (4) 4X4X1/4 PLATES TO WELD PASSENGER DOOR CLOSED AND GET 6 PLATES FOR DRIVERS DOOR.
--4 DOOR CARS GET 6 PLATES ON PASSENGER SIDE AND 8 PLATES ON DRIVERS SIDE.
--CAN HAVE BAR OUTSIDE DOOR ON DRIVER SIDE NO MORE THAN 1' OVER EACH SIDE.
--BUMPERS--ANY OEM.  NO CHRYSLER IMP BUMPERS.  ONLY STOCK BUMPERS CAN BE FILLED FRAME TO FRAME. MAY BUILD 4X6 BUMPER NO MORE 6” TALL AND NO MORE THAN 8” POINT FROM FRONT TO BACK. MAY HAVE ONE 4”X3” ¼” PLATE ON FRAMERAIL TO HOLD BUMPER. NO BENDING OF PLATE. HAS TO BE WELDED TO BUMPER.
--MAY CUT FRAME IN FRONT OF RADIATOR SUPPORT. HAVE TO LEAVE STOCK RADIATOR MOUNTS. NO WELDING OF THESE MOUNTS. CHRYSLER Y FRAMES MAY WELD ¼” PLATE TO COVER Y NO MORE THAN ½” PAST THE Y ON ALL SIDES. HAS TO BE STITCH WELDED 3 on 3.

--STOCK HOLES FOR MOUNTING MUST BE LEFT.

--CAN USE 2 PIECES OF ¼”X6” STRAP TO HOLD IT ON IN A TRIANGLE SHAPE. IF NOT THIS WAY, THEN NO USE OF PLATE.

--ANY OEM MADE SNOW TIRES ALLOWED.  SKID STEER OR CLOSE TREADED TRACTOR TIRES.   CAN BE STUFFED OR DOUBLE MOUNTED.
--FULL CAGE AND ROLL OVER BARS ARE MANDATORY. CAGE CAN BE WELDED TO TOP OF FRAME NOT SIDES. HAVE TO LEAVE HOLE CUT TO VERIFY TO TECH THROUGH FLOOR. UNIBODIES CAN WELD CAGE TO 6” PLATE AND HAVE ANOTHER 6” PLATE UNDERNEATH BOLTED TO SANDWICH FLOOR.
--HOOD HAS TO HAVE STOCK HINGES AND 4 ¾  BOLTS TO HOLD IT ON. MAY USE ¾ ALLTHREAD IN STOCK HOLE THROUGH RADIATOR SUPPORT THROUGH HOOD BUT NO WELDING TO RADIATOR SUPPORT OF ANY KIND. MAY USE 3 ¾” NUTS PLACEMENT OF YOUR DESIRE TO HOLD THREADED ROD IN.
--TRUNK HAS TO USE STOCK HINGES AND 4 4X4X1/4 PLATES TO WELD ANYWHERE YOU WANT.  YOU CAN TUCK TRUNK NO MORE THAN HALF WAY.
--ONLY TWO GROUP 65 BATTERIES SIZE OR SMALLER MAY BE USED. BATTERY AND FUEL TANK MUST BE INSIDE OF CAR.  MUST BE FUEL CELL OR NO MORE THAN 10 GALLON TANK.
--SUSPENSION HAS TO BE STOCK, UNALTERED, NO WELDING OR STIFFENING OF ANY KIND.

A. A ARMS MAY BE WELDED OR BOLTED NOT TO EXCEED 1” BOLT OR 1 ½ OF WELD.

B. ¾ SPACERS ARE MANDATORY. I’LL GIVE YOU THE EXTRA ABOVE THE HUMP IN FACTORY BODY MOUNT SPOT WITH 5/8” BOLT.

NO TILTING OF ANY CAR.

C. NO INTERIOR CHROME ECT. 

D. MAY RUN ALUMINUM RADIATORS BUT IN STOCK LOCATION. STOCK MOUNTS OR IN STOCK LOCATION AND RATCHET STRAPS. 

E. 12 INCHES OF VACUUM WILL BE ENFORCED THIS YEAR. ONLY AFTER MARKET MOUNTS ARE STOCK APPEARING MOUNTS TO MOUNT IN STOCK LOCATION. LOWER CRADLES, NO DP CARB PROTECTORS, ETC.

F. MAY CHAIN REAR END WITH 3/8 CHAIN AND 1 3/8 BOLT THROUGH HUMP IN CENTER ABOVE REAR END.

G. MAY WIRE HOOD TO BUMPER NO MORE THAN 2 LOOPS, 4 STRANDS, 24” APART.

H. AIR CLEANER MUST NOT STICK UP PAST HOOD. NO PERFORMANCE INTAKES. NO MSD OR BOXED IGNITION. ALL OE APPEARING STYLE.

I. 9 WIRE MAY BE USED IN PASSENGER AREA ONLY. 2 LOOPS, 4 STRANDS TO BODY—NOT TO FRAME OR TO CAGE. 3 INCH WASHERS ALLOWED TOP AND BOTTOM.
--REAR END CAN BE ANY OEM NON-BRACED AND CAN BE WELDED.
--NO AFTER MARKET AXLES.

--REPAIR PLATES 4”X6” NO MORE THAN 6 TOTAL. ¾” HOLE IN MIDDLE. HAS TO BE NEEDED IF DEAN FEELS IT IS NOT NECESSARY, YOU WILL CUT. NO SLITTING OF PLATES. HOLE IS MANDATORY.
--WINDSHIELD BARS ARE REQUIRED--NO LONGER THAN 3 INCH STRAP AND ONLY 2 BARS.

--REAR WINDOW BAR MUST BE USED NO MORE THAN 6” WELDED TO ROOF IN CENTER AND BOTTOM 3” ON TRUNK LID AND 3” IN FRONT OF TRUNK SEAM IN CENTER.
-- TRY TO LEAVE AS STOCK AS POSSIBLE.
THIS IS A BEGINNER CLASS.

THESE ARE THE RULES THAT NEED TO BE FOLLOWED. DISGARD ANY RULES BEFORE JANUARY 1, 2019.

Have you opened a new location, redesigned your shop, or added a new product or service? Don't keep it to yourself, let folks know.

Display their FAQs

Customers have questions, you have answers. Display the most frequently asked questions, so everybody benefits.